So I’m building a new computer before the end of the year and lemmy is obviously pushing me towards Linux.

I am not computer savvy, I have a family member that will help me set up my PC, but I do not want to be calling/messaging them every day when I want to open a program.

Basically my question comes down to: can I operate a Linux PC these days without needing to troubleshoot or type code.

I use my computer about once a week for a few hours I would say, so any time spent troubleshooting is time wasted.

Thanks!

EDIT: since a lot of people are asking what programs I typically use, I’ll just list my most used programs.

Word, Excel, ect(I’m fine with alternatives)

Spotify

Gimp (would have been a make or break, so I’m glad it’s supported)

Brave browser (browser is a browser)

Steam

Discord

I would say that while I could figure out how the kernels work, I’m at a point with computers these days where I don’t have the time. My priorities fall with a seamless daily experience. If I have the time to figure something out I can, but ideally my day to day usage being unbotherd is what I’m after.

A lot of the comments so far have been helpful! I’m definitely going to give Linux a fair shot with my new build, probably start with Mint.

  • PoorlyWrittenPapyrus@lemmy.world
    link
    fedilink
    arrow-up
    123
    arrow-down
    1
    ·
    edit-2
    28 days ago

    It could not be simpler.

    My grandfather in law kept getting scammed and installing viruses while on Windows. I installed Linux Mint on his desktop last year, setup automatic updates, created a non admin account for him, changed a few easy configurations to hide the technical stuff that appears when you turn the computer on, and he fucking loves it.

    Keep in mind getting this man to login to Netflix on his TV is a minimum 30 minute long phone call. One time, we had to send people to check on him because his phone was off for 3 days straight; he put it on airplane mode and couldn’t figure out how to turn it off.

    He has had 0, yes, exactly 0, problems with his computer since I installed Linux Mint. It’s faster, to point where he noticed and commented on it, and he finds it easier to use than Windows, which has been on every computer he has ever owned.

    He brags to anyone who will give him the time of day how much he loves it.

    I promise you, it’s really that easy.

    • Grunt4019@lemm.ee
      link
      fedilink
      arrow-up
      6
      ·
      27 days ago

      I feel like Linux is good for power users or users like your grandfather who are not very tech savvy. The issues arise with users savvy enough to get themselves into trouble but not enough to understand how to fix it or how to do a slightly more advanced task.

    • thanks_shakey_snake@lemmy.ca
      link
      fedilink
      arrow-up
      3
      ·
      27 days ago

      Same experience with my relatives. I had some family whose Macbooks were no longer able to update (for Apple forced obsolescence reasons). They run Mint now, and have never had a single problem since I first set them up.

      Well, one of them called me because they couldn’t figure out how to attach a file to an email… But that problem would have been identical on Mac OS.

  • deadbeef79000@lemmy.nz
    link
    fedilink
    arrow-up
    51
    arrow-down
    2
    ·
    29 days ago

    Yes it is. Pick a newbie friendly distribution. Say Ubuntu.

    IMHO Windows is only “user friendly” because it’s preinstalled on most PC’s.

    User friendliness comes with experience.

    • chevy9294@monero.town
      link
      fedilink
      English
      arrow-up
      2
      ·
      edit-2
      27 days ago

      IMO it’s the best (desktop) Chromium-based browser. Which means it’s a bad browser but there are a lot of worse options.

    • static_hash@lemmy.dbzer0.com
      link
      fedilink
      English
      arrow-up
      7
      arrow-down
      25
      ·
      28 days ago

      I agree on the stop using brave part, but if your blog starts with this argument, your opinion piece means shit

      Why was appointing Eich as CEO so controversial? It’s because he donated $1,000 in support of California’s Proposition 8 in 2008, which was a proposed amendment to California’s state constitution to ban same-sex marriage. Eich wrote a blog post defending himself in 2012, when the donation was initially discovered, where did not apologize and denied the donation made him a bigot

  • just_another_person@lemmy.world
    link
    fedilink
    arrow-up
    43
    arrow-down
    4
    ·
    edit-2
    29 days ago

    I assume you’re talking about Desktop Environments. Yes, of course. KDE and Gnome rival MacOS as far as usability goes. The better part is that other software development groups port their software over to Linux as well and make it as seamless as possible.

    People run into confusion here when people flood the comments on user questions like this, so let me shut that down right now.

    If you need something that is a straight Desktop Environment, get a distro with KDE or Gnome, and a known OS that will have a lot of user base getting questions and answers if you even run into any.

    Fedora or Ubuntu. Don’t listen to anyone arguing for their preferred favorites.

    Don’t listen to performance comments.

    You want a solid, no issues, not needing to look for help kind of distro. It’s those two, no question, and they both have KDE and Gnome variants.

    That’s really about it.

    • thayerw@lemmy.ca
      link
      fedilink
      English
      arrow-up
      23
      arrow-down
      2
      ·
      edit-2
      29 days ago

      I would maybe add Linux Mint to that list, but otherwise you’re spot on. Fedora and Ubuntu are the easiest and most robust systems for novice computer users.

      • JustEnoughDucks@feddit.nl
        link
        fedilink
        arrow-up
        2
        ·
        27 days ago

        Depends. If someone is gaming with new hardware, don’t use a distro that doesn’t update the kernel quickly and regularly.

        Almost every problem with hardware on mint is solved by going through the process of updating the kernel or switching to a distro with up to date libraries.

        It’s fine for a lot of people, but it doesn’t “just work” outside of the use case of only browsing the internet and word documents.

        This is coming from someone who used mint for 4 years. There was about a dozen times where the software on the software center was so out of date that it simply didn’t work and I had to resort often to using random ppa’s which often broke other things. Definitely not user friendly.

        That being said, Cinnamon is probably one of the most user friendly DEs for people switching from window. It is very nice.

        • thayerw@lemmy.ca
          link
          fedilink
          English
          arrow-up
          1
          ·
          27 days ago

          Fair points. I’ve only ever taken Mint for a quick spin and that was a decade ago. I just see it constantly recommended as one of the most user-friendly distros, thus the maybe recommendation.

          Personally, I’m all in on Fedora Atomic for my hosts and (mostly) Arch in my containers.

    • wulf@lemmy.world
      link
      fedilink
      arrow-up
      13
      ·
      29 days ago

      Fully agree with this. There will be a slight learning curve since it will be different from what your used to, but it’s friendly enough to figure out.

      If you know the windows program you want to use just search something like “Linux alternative for x” (sometimes there is specific KDE or Gnome progs)

    • subtext@lemmy.world
      link
      fedilink
      arrow-up
      5
      arrow-down
      3
      ·
      28 days ago

      Only thing I might add would be potentially Bluefin. It is Fedora with Gnome, except Atomic. It markets itself as:

      The best of both worlds: the reliability and ease of use of a Chromebook, with the power of a GNOME desktop.

      It’s been fantastic for me with automatic updates and everything installed through flathub so you don’t bork your system with any misconfigured installs.

      https://projectbluefin.io/

  • t_378@lemmy.one
    link
    fedilink
    arrow-up
    21
    ·
    28 days ago

    I’ll be slightly contrarian to others and give a different perspective: you may find yourself hitting some roadblocks, I’ll try to explain.

    I set up Linux Mint for my elderly parents. The key thing is, I set it up for them, functioning as the administrator for that machine, making sure they had a non admin account and configured their desktop to only show the shortcuts they cared about (firefox).

    It worked fine, and I only got calls once every few months. They got scared if some popup occured, or if they accidentally saved something to their desktop that they wanted to get rid of. I don’t know if that really meets the definition of seamless, and I don’t know if you’d even consider those problems.

    The other thing that can happen, is hardware interfaces. I know that you’ve listed out your use case. I’m just saying that if your birthday rolls around and someone buys you a 3d printer where you “just plug it in”, you’re going to be in for a long troubleshooting day, if it isn’t natively supported.

    With Steam games, you can often get away with enabling proton, but… Small issues like being able to select multiple drive folders have sent me down long troubleshooting avenues as well. And when I use the word troubleshoot, I’m inevitably referring to the command line.

    Lots of people are encouraging you to try, and you can make that decision. I just want to toss out that it might not be seamless. But I don’t think Windows is seamless either. It’s just what most people are used to.

    • Roopappy@lemmy.ml
      link
      fedilink
      English
      arrow-up
      16
      arrow-down
      1
      ·
      28 days ago

      I don’t think Windows is seamless either. It’s just what most people are used to.

      This. I’ve never used Windows 11. Apparently, they are removing the Control Panel. If I can’t figure out how to fix a problem that comes up, I’m going to have to search for the answer and test out solutions. This is no different from Linux.

      • Peasley@lemmy.world
        link
        fedilink
        arrow-up
        6
        ·
        28 days ago

        Hardware support is also two-sided.

        For example: game controllers.

        On Linux, any first-party Switch, Playstation, or Xbox controller works out of the box. Most 3rd party controllers also work out of the box. Even Wii remotes work once paired over bluetooth (and the pointing works but takes some setup).

        On windows, xbox controllers work out of the box, except for very old ones which require a driver. 3rd party pc controllers will tend to work out of the box (or sometimes with a driver), but wired Switch and Playstation controllers need hacky workarounds to work or to get full functionality. Wireless controllers can often be paired with bluetooth, but I’ve had hit and miss luck with windows and first party Sony/Nintendo controllers

  • teawrecks@sopuli.xyz
    link
    fedilink
    arrow-up
    20
    arrow-down
    1
    ·
    29 days ago

    It’s better to ask which distro is dummy proof. Some are made for noobs and windows users, others are not, and they’re all based on “Linux”.

    Mint, Debian, and Fedora are all good starter options, and all are made to get stuff done without having to use the command line.

      • teawrecks@sopuli.xyz
        link
        fedilink
        arrow-up
        1
        ·
        28 days ago

        Debian is the only one there I haven’t actually tried myself as a daily driver, so idk if using the terminal is necessary. I’ve just heard it’s solid and I assumed all normal user operations can be done via GUI in gnome or KDE like you can with Fedora.

  • kyub@discuss.tchncs.de
    link
    fedilink
    arrow-up
    18
    arrow-down
    1
    ·
    edit-2
    28 days ago

    Dumb user friendly (having no particular background): yes

    Dumb user friendly (having Windows background): no

    Windows knowledge makes learning other OS harder because Windows is the weirdest OS out there.

    • UnfortunateShort@lemmy.world
      link
      fedilink
      arrow-up
      5
      ·
      edit-2
      28 days ago

      Eh, in terms of UI and shortcuts, Plasma is very close. If you sit a Windows poweruser in front of Plasma, I’m quite confident they will feel right at home.

      That’s actually how I got introduced to Linux. Then I discovered the Settings app. Fast forward: EndeavourOS btw.

  • elxeno@lemm.ee
    link
    fedilink
    arrow-up
    16
    arrow-down
    1
    ·
    28 days ago

    Mint should be pretty easy to get used to, solid choice IMO, as for the programs

    Word, Excel, ect(I’m fine with alternatives)

    If you’re fine with libreoffice, no problems

    Spotify

    Don’t know.

    Gimp (would have been a make or break, so I’m glad it’s supported)

    No problems

    Brave browser (browser is a browser)

    Not sure if there’s a flatpak, U might need to add a PPA, but it’s just a one time copy/paste a few commands.

    Steam

    Works fine, but some games might not run or require some tinkering, check games u play on protondb.com

    Discord

    It’s a bit annoying because they require u to have the latest version all the time, it won’t auto update, and the package might take a while to update, so u either download and update manually every time (it will be a different install than the flatpak package) or use the web version, peraonally i just run a script to download and extract the tar.gz version when there’s an update.

    • red@lemmy.zip
      link
      fedilink
      English
      arrow-up
      6
      ·
      28 days ago

      brave has flatpack , and you don’t really have to do all that to update discord just go to software store and click update?

      • elxeno@lemm.ee
        link
        fedilink
        arrow-up
        1
        ·
        28 days ago

        I don’t use flatpak but i assume there’s a delay between discord and flatpak updates, or even if there is no delay

        just go to software store and click update?

        This would up