I’m looking for some recommendations to improve my homelab. But first a bit of history to explain where I’m at and where I’m going. I currently have a super old Odroid C2 and a Raspberry Pi 4B. Everything is working great, but I’m missing two things in this setup: -The ability to transcode -A NAS Now a little bit about me, I’ve been using Linux for more than a decade, so I know how to do stuff, but when it comes to hardware, I have close to zero knowledge… So I was a bit surprised when I plugged 2 external HDDs on my rpi and it shutdown them after a few minutes. I found out that it was a power supply issue, so I did the first thing that came to my mind at this time: I bought another HDD with external power supply, to then find out that having a self powered and an external powered HDD would still fail (although it took longer).

So now I know my mistakes, I should have gone with a NAS instead. I checked the Synology NAS and found out NAS are actually quite expensive. I’m looking for at least 4 bays. I’ve been looking at some DIY NAS, but I’m a bit lost. I found some builds using a Jonsbo N2 that seems cool but at the same time I’m reading the fans are always running at full speed and I’m afraid that the power consumption will skyrocket.

So to sum up, I would like to have a NAS, ideally that can transcode and is low power. In the beginning, I wanted to have a NAS and a mini-PC that can transcode to replace my Odroid C2. But it seems the NAS are far more expensive than the mini PC. What are the recommendations here?

-Synology (Can it transcode?)

-A DIY (Jonsbo with an ITX board that can transcode)

-A DIY (Jonsbo with an ITX board just powerful enough for a NAS) + a mini PC

-Something else?

My budget was 500€, but it seems I won’t be able to do much below 700€

  • Kwa@derpzilla.netOP
    link
    fedilink
    English
    arrow-up
    0
    ·
    9 months ago

    I would have, but this is all about the power consumption. Getting an old PC, I’m afraid to be at least around 100W…

    • Elkenders@feddit.uk
      link
      fedilink
      English
      arrow-up
      0
      ·
      9 months ago

      I use an Intel NUC with a recent(ish) Intel CPU that’s good for transcoding and not bad on power. Then a 4 bay DAS. You can either get something with hardware RAID or without and do it in software. I run Debian but another OS might be better for you.

      • pirat@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        6 months ago

        Got any recommendations for a good DAS with a fair price, either new or used?

        I’m looking for something to place three 22 TB drives in, eventually to be expanded in the future, so I’m looking for a DAS with at least three 3.5" bays.

        • Elkenders@feddit.uk
          link
          fedilink
          English
          arrow-up
          2
          ·
          6 months ago

          I bought a used QNAP TR-004. Seems to do the job but I didn’t realise it doesn’t support migration or expansion which is a bummer. Expansion in particular, I bought 3 8tb drives so got an empty bay that will be awkward to fill when needed.