I spent all day today trying to get the routing to work correctly between Tailscale, Nginx and Adguard.

Basically I wanted to be able to be able to use **http://immich.network ** to route to 192.168.1.2:9000

I wanted to share the steps I took so people don’t have to go through what I did.

First a few things Local Server IP: 192.168.1.2

  1. I installed Ngnix and Adguard, in a Docker Containers, and gave Adguard IPs 3000, 3001 instead of 80 and 443 because Ngnix took it.
  2. I went to my router and made it use the DNS: 192.168.1.2
  3. I configured Proxy Host in Ngnix … immich.network => 192.168.1.2:9000
  4. I configured DNS rewrite in Adguard … *.network => 192.168.1.2

At this point I was able to use http://immich.network finally. I installed Tailscale to be able to access when I’m outside but http://immich.network didn’t work.

These helped me https://tailscale.com/kb/1019/subnets + https://tailscale.com/kb/1054/dns?q=global+nameserver

  1. I created a subnet… tailscale up --advertise-routes=192.168.1.0/24
  2. I approved it on Tailscale login

At this point I was able to access home server using its local IP 192.168.1.2 but I couldn’t get http://immich.network to work.

  1. I created a nameserver dns with split DNS but I used my local ip… 192.168.1.2 => network

Finally everything is working… I have a feeling that I’m doing it wrong but I’m too tired and it’s finally working.

  • Mir@programming.devOPEnglish
    1·
    8 months ago

    I just finished the SSL today, but have you gotten Syncthing GUI to work though? I can’t seem to get it to work with the domain for some reason.

    • N0x0n@lemmy.mlEnglish
      1·
      8 months ago

      Hummm, I have a syncthing instance in a docker compose, so yeah I can access it through my ssl domain (https://syncthing.home.lab) but traefik takes care of everything.

      Now if it’s on your local machine you’re trying to use your SSL certificate I don’t know, I always access it through the local ip (127.0.0.1:8384).

      If I had to guess or give it a try, I would point the IP to my dns through my host file on my machine. But that’s just a wild guess :/

      I think syncthing has a good documentation about it :)

      • Mir@programming.devOPEnglish
        1·
        8 months ago

        I can access using the local ip but I can’t access using the ssl domain, I can access it but I can’t login for some reason. I can’t figure out how to fix it

      • skittlebrau@lemmy.worldEnglish
        1·
        8 months ago

        You could use split DNS on your router (or wherever your DNS is) so that when you visit the syncthing address on your local network, you’re being directed to traefik.

        I use a domain override in pfsense for syncthing.myhomelab.com which points to my reverse proxy’s local IP.