But the last release for it will be in December.
There is the fork mentioned in the forum post here.
https://forum.syncthing.net/t/discontinuing-syncthing-android/23002
https://github.com/Catfriend1/syncthing-android
I don’t use Syncthing and don’t have an Android phone so I can’t really speak for it in terms of functionality.
Id make it 2 or 3 gb. That being said, 1 gb is fine for such a light install. I have a similarly specced pentium M machine running modern debian with OpenBox. For heavier tasks, it was hitting swap (using a web browser). Upping it to 2 gb ram fixed that.
Edit: this also came with an ATI Mobility Radeon 9700 gpu which probably has a bit more support than the PowerVR gpu in the Atom.
There’s quite a few. I have bunsenlabs helium installed on a 32 bit pentium M laptop. It’s very usable, for a 20 yo single core machine. For basic things, it’s still fine. I do have some gpu acceleration though which is a benefit.
OpenBox but that’s a window manager, not a DE.
I was thinking embedded clients would be the bigger issue. Stuff like POS machines, that sort of thing.
At least on my pavilion, it’s just one simple daughter board for one of the USB ports. It’s the one I use the most. I can replace it easily if it breaks. The pcb is also very simple so it ends up being very cheap.
The square shaped one threw me for a loop the first time I worked in a computer with one.
Very Andersen powerpole esque
In my experience, USB c is soldered to the main board while the plug is a small module thats attached to the module. It’s easier to replace a small module than replace a whole USB c port. Ideally it’d be on a seperate board too. But it might be a bit more complex.
My sister broke one of the two USB c ports on her Thinkpad and if the second one breaks (both support charging), I can’t fix it easily without sending the motherboard out for repair and spending like $200.
Edit: you can support both USB c and DC plugs. My laptop can (HP pavilion).
Yeah but then it isn’t as light (but 250 grams is nothing tbh). The 64Wh one is 888 grams. Still less than a kilo which is very impressive. Just under 2 lbs.
I also hate the lack of USB ports now. That’s about average for the “nice” laptops of this day and age. I hate juggling around my peripherals bc I don’t have enough type c ports. I do hope it’s a barrel plug for charging and not only USB C pd.
That would be awful. i have a laptop at roughly 31 Wh capacity and it was basically unusable with the 11th gen i5 intel cpu. 2 hours of usable battery life. Take into consideration that batteries tend to live at 80% capacity for a long while and then you realize that laptop will have a 24Wh capacity. Basically two smartphone batteries worth of capacity
Trying to disable the lid close sensor on my laptop. My issue is twofold. It’s a convertible (pavilion x360) and I’m using bunsenlabs Linux.
Did yours overheat really badly? My 11th gen i5 pavilion did. Repaste, everything. Just ran super hot on battery. It’d kick on the fan and goodbye battery
I run puppy Linux 4.20 on a p3 laptop with 192 mb of ram. It’s fine. It feels as heavy as windows me. A p2 with 32 mb of ram might be a bit tough.
this is correct
I honestly haven’t tried any other nvme ssds with it because it’s such a pain to install new ones in that computer. It’s a motherboard removed procedure. I have an sn850x that Id want to try with it. It was on bookworm so an updated kernel.
I wouldn’t say it’s a full on daily, but Bunsenlabs distros. It started out with Lithium because they had a non PAE build and I needed it for an old Pentium M laptop. I ended up really liking it. It’s debian at the end of the day so software support is plentiful. It’s super lightweight. It ran on the pentium m laptop (only 1 gb of ram) without much issue. It’s also baby’s first foray into window managers as it used openbox.
I ended up installing it on my other old laptop that has an 8th gen i7. I’ve been pretty happy with it as a result.
I.have 2 gripes but idk if it’s Bunsenlabs’s fault. I had an nvme ssd that refused to play ball with it, a Samsung PM991A nvme ssd. I couldnt work with it at all. Using gparted to format it was a no go as Gparted would just die. I know that line of ssds is problematic in the hackintosh community. Not surprised that it sucks here. Also trying to disable the lid close is impossible. Tried cli, can’t find my lid close sensor. It might be because it’s a x360 laptop so it’s a lot more complex lid detection wise.
I’m stupid. I didn’t realize it said onlyoffice, not open office. Oop
Use libreoffice over open office.
What’s your snid? It might show up as a different model on a different website.
I know for HP machines, the bios updater exe can be decompressed and you can just get the bios image and the signature file from that.
Idk what machine you have, but at least for an older aspire laptop my friend has, there is a bios download.
If you follow instructions to make bios recovery media, you can update your bios through that.
Edit: that Acer laptop you have doesn’t even show up on Acer’s support page. Supposedly it’s sold as an Acer aspire a something or other. If you search based on your snid, you should be able to get to a downloads page.
Also clevo seems to make this laptop, according to the Acer India webpage I found for it
The atom cpu in this has a powervr sgx545 gpu which is barely supported by anything. Ubuntu 12.04 has some support but it’s only 2d acceleration.