ares35

i bought a few smr drives, knowing they were smr. they were cheaper, a lot cheaper than the same amount of space in cmr. used only for static media storage, so that’s not a big deal, really., but holy hell was it slow getting stuff on them initially.

i have a few self-powered externals that are also smr (quite common with those as they use 2.5in notebook hdd). when those things have to start shuffling bits around and rewriting tracks, sustained write speeds fall well under what even usb2 can send.

i bought a big external hdd recently on impulse… a clearance sale. it was really, really cheap. with the thinking that i could ‘shuck’ it because i’m short on space in a couple storage systems. i checked. i can, but i haven’t. hell, i haven’t even used it yet other than to run a full smart diag on it, followed by a full format and a read/write verify. took days. then i put it back in the box and have basically forgotten about it until now.

you have to be careful on what models you buy. some have usb built onto the controller board (no internal sata) or other things (e.g. encryption chip, weird power) that make it more difficult or even impossible to use the internal drive in an environment other than the enclosure it ships in.

on my arch-based systems, i use repos first, aur second. appimages third. i do also have a couple minor things (that are self-contained with no dependencies) that were just ‘unzipped’ into their own directories and links added to menus where appropriate. note that i don’t game on these systems. i don’t have a lot of aur packages installed, so updates and subsequent recompile time isn’t an issue.

i have yet to run into anything i want or need that isn’t available in those. so no flatpaks or snaps.

hard drives are going to be slow af copying data to itself, or moving data to a different partition on it.

then you’re also adding partition size manipulation to the mix, which will also be slow af when data has to be moved off the ‘end’ of partitions to ‘make room’ to enlarge or create another with a different fs.

your best option is to get another drive, even if it’s also a hard drive instead of ssd. use that to move (copy, really, to preserve the original as a backup for the time being) all the data to that you want to preserve.

upgrades have been working fine here, both linux and windows, for well over a decade.

only if a system is also being repurposed at the time of the ‘upgrade’, or if i’m changing the connection type of the boot drive (such as from sata to nvme, or switching an older system to ahci mode) do i install ‘from scratch’.

definitely keep windows on it to begin with. once you’re fully settled-in on linux and haven’t even looked at windows for at least a couple weeks, make one last backup… then nuke it or repurpose it.

patents is what you’re thinking of. and all (afaik) of them relating to mp3 format have expired.

usb nvme adapters are not expensive and it likely won’t be the only time you need it. they are a handy accessory to have on hand if you have nvme storage.

don’t mess around with imaging to a file on the zfs, then restoring it. simply clone nvme -> nvme using a usb nvme adapter then replace the internal with the clone.

upgraded here. no problems. didn’t even notice the version increment until i went looking for it.

you should be able to ‘rufus’ an installer for that. the instruction in the ‘new’ minimum requirement dates back to 1st gen.

i just directed someone to a 12th gen laptop (i5-1235u) with 16gb ram and 512gb nvme at dell for $430 in a ready-to-ship configuration, search their site for nn3520gsbbs to find it.

you mean debian, right?

they count clicks on a distro’s page on their site, not usage or anything else.

if they dared put hanna montana linux on there, it would be the perpetual #1 listing.

a pallet of 4th gens? i have a dozen left here from around that era that i can’t get rid of without literally giving them away. they’re ‘tolerable’ for a gui linux or win10 with an ssd, but the ‘performance per watt’ just isn’t there with hardware this old. i used a few of them (none in an always-on role, though), but the rest just sit in the corner, without home nor purpose.

these 800 g1s are, iirc, 12vo, so upgrade or reuse potential is a bit limited. most users would want windows, and win10 does run ‘ok enough’ on 4th gen, just make sure they’re booting from ssd (120gb minimum). but they’ll run into that arbitrarily-errected wall-of-obsolescence with trying to upgrade or install win11 when win10 retires in ~ 18 months (you can ‘rufus’ a win11 installer, but there’s no guarantee that you will be able to in the future). that limits demand and resale value of pretty much all the pre-8th gen hardware.

if they put all their tv/cable channels online and had a comparable ease-of-use of turning on a tv and flipping channels (without jacking d+ rates up–except espn; sports channels should be separate), they’d see a huge influx of subs and higher long-term retention of them.

but, they won’t do that. they have the cable and satellite companies by the balls, and they squeeze regularly. gotta extort higher overall profits from that dwindling customer base–and they do.

if it supports the basic hardware, there’s nothing wrong with peppermint for basic stuff like your use case. after the base system is installed, add a browser and libreoffice and you’ll have a nice little system for writing on.

if you want to keep using windows on it, you’ll probably have to ‘start over’ with a plain install of windows (without hp’s junk, and to a clean–partition table cleared–‘hard drive’), uninstall the useless crud like candy crush that comes with the base windows install, ensure compactos is enabled (it should be automatically enabled with those specs), install your browser and word processor. you shouldn’t have to do thing where you connect an external drive for ‘working’ space for updates (something i’ve only ever had to do twice on 32gb emmc models) anymore as long as updates stay relatively current.

but with only 2gb ram and a 10 year old ‘atom’ based cpu, i’d probably go straight for peppermint.

samsung sold their printer business to hp in 2017.

if you’re running batteries down often enough to need battery replacements that frequently, you may be going ‘too cheap’ (poor quality and/or not enough capacity) to begin with, and would need an upgrade not another ‘cheap’ solution.