I’d have to check my iptables syntax again but I’m not sure you want the FORWARD between the networks unless C has a manual route to get traffic for the 192.168.15.0/24 network back via B. You just want to NAT A behind B’s IP on 192.168.38.0/24. I think the forwards are sending the traffic without doing NAT on A.

The phone or browser may be using DNS over HTTP (aka DoH), check if you can disable it for the wifi network. You may have to disable it on the phone or browser to get your desired behaviour - look up directions for your browser.

Right now - easy, with the difficulty going up over time as the main Chromium codebase continues to change (and especially as it gets security updates). I think I’ve read that some variants (Brave?) have committed to supporting ManifestV2 for as long as possible, for instance with their own fork.

If it’s logs, there’s a package called log2ram - it’s designed for small form factor systems to reduce writes to SD cards but does apply anywhere you want to log but not hit disk immediately. It syncs logs to disk on a regular basis so you don’t lose much if the system crashes.

From a Linux command line it would be the command called arp, you need to add a static arp entry. I don’t know how that works on sense, but on Linux it would be something like arp -s IP MAC

Maybe there’s a module in opnsense to help. The way I’ve done this before is using a machine connected to the same network at my target to wake up by logging into that machine and issuing the wake command.

WoL packets are usually sent to the ip broadcast address for the network as they’re not ip based. I don’t know if this would ever work well across networks. Can you do send the wol packet from the opnsense router instead? Does it work then?

If you’re sending it to the IP of the server, it likely works soon after your turn the machine off because the ARP entry hasn’t timed out yet, but once it times out it won’t work anymore. The router doesn’t know how to get to the machine. You may be able to add a static arp mapping to get it to work long term.

All that yes. The Wooting One (original that uses IR light) let you use buttons to simulate controller axes, change how hard you need to press to activate, and add second functions to keys. It was an interesting idea but I found the gaming part the original keyboard to be only usable in a limited set of games as it’s not as sensitive as a controller stick, and as a keyboard it wasn’t great either. Hopefully V1 problems, I know they had through another version of the IR keyboard, and then came out with the Hall effect keyboard. I like the idea but never could get used to it, and when the spacebar was loose I retired it after fixing it.